JA-80P has a PIR sensor which covers up to 112m² of floor (an optional pet-immune lens can eliminate the effects of small animals). It uses digital signal processing to avoid false alarms. It also has an input to connect a door sensor. Can be enrolled to the control panel, to UC and AC receivers (to trigger relays) and to the JA-80L indoor siren (to indicate movement by making a sound)

The JA-84P provides human body movement detection including visual alarm verification. The detector’s camera is equipped with a flash and infrared light to take photos in the dark.

The JA-80PB combines a PIR motion sensor with a dual glass-break detector (breaking a window can be detected up to 9 meters away). It uses digital signal processing to avoid false alarms. It provides an input to connect a door sensor. This detector occupies two addresses in the control panel to distinguish between motion and glass breaking. Can be enrolled to the control panel, to UC and AC receivers (to trigger relays) and to the JA-80L indoor siren (to indicate movement by making a sound)

The JA-86P is designed to detect human body movement inside buildings. Detection in two zones is employed for superior immunity to moving pets. The battery-powered detector communicates via OASIS radio protocol.

The JA-80S is a component of Jablotron’s Oasis 80 alarm system. It is designed to detect the presence of fire inside a building. It reacts to visible smoke or exceeding a critical temperature in a room. The battery-powered detector communicates via OASIS radio protocol and has a built-in local warning siren.

The JA-80G is activated by combustive gases or fume leakages. It uses a hot platinum filament sensor. This detector is mains-powered (230V AC) and besides wireless signalling to the system, it also provides a relay output to shut down an electric gas inlet valve, if installed. Can be enrolled to the control panel, to UC and AC receivers (to trigger relays) and to the JA-80L indoor siren (to indicate activation by making a sound)

The JA-85B detects a window breaking at a distance of up to 9 meters away. It uses digital signal processing to avoid false alarms. It can also be installed in a car interior. Can be enrolled to the control panel, to UC and AC receivers (to trigger relays), to the JA-80L indoor siren (to indicate activation by making a sound) and to CA-18xx car alarms.

The JA-58P is a mini-size PIR sensor suitable for protecting small rooms or car interiors. It uses digital signal processing to avoid false alarms. Can be enrolled to the control panel, to UC and AC receivers (to trigger relays), to the JA-80L indoor siren (to indicate activation by making a sound) and to CA-18xx car alarms.

The detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms). This information is sent to an alarm system to send out an alert message. It is connectible to an Oasis alarm system via a JA-81M wireless detector.

The JA-81M is designed to detect the opening of doors, windows etc. It can also be extended by a normally closed / normally open sensor connected to its wired input.

The JA-88P is a dual-zone outdoor wireless motion Oasis detector and has an Optex sensor and transmitter. Communication range is 300m, detection range 12m. 2 tamper sensors, front and back.

The JA-80IR is designed to detect the interruption of infra-red beams by intruders walking between IR transmitters and receivers. The unit comprises an Optex sensor and a Jablotron transmitter and is powered by 4 lithium batteries.